§ 3343.13. Roadways.  


Latest version.
  • Each manufactured home site in a manufactured home park or section thereof shall abut on a paved roadway within the manufactured home park which has a clear, unobstructed, paved width to accommodate the contemplated parking and traffic load. The design, installation and subsequent improvement of all roadways shall be subject to the final approval of the director of public service and/or their designee. The director of public service and/or their designee shall approve no circulation or roadway plan unless it meets the following minimum criteria:

    (A)

    Each two-way entrance and exit roadway shall have a width of no less than 35 feet exclusive of any median strip. Each one-way exit or entrance roadway shall have a width of no less than 20 feet;

    (B)

    A minor or cul-de-sac roadway may have a width of no less than 20 feet provided that no parking is permitted therein;

    (C)

    Parking may be permitted on both sides of a roadway having a width of 35 feet or more;

    (D)

    Parking may be permitted on both sides of a roadway having a minimum width of 28 feet provided that such roadway has been designated as and traffic movement is limited to one-way;

    (E)

    Parking may be permitted on only one side of a two-way roadway having a minimum width of 28 feet;

    (F)

    Parking may be permitted on one side of a roadway that has a minimum width of 20 feet provided that such roadway has been designated as and traffic movement is limited to one-way.

    The director of public service and/or their designee shall not approve any private roadway unless it meets the following minimum criteria:

    (A)

    The improved surface shall be constructed of asphalt concrete or Portland cement concrete on an appropriate sub-base as required by the director of public service and/or their designee.

    (B)

    Curbs and gutters made of Portland cement concrete shall be required along each side of the improved portion whenever such improved portion has a required width of 30 feet or more. Such curbs and gutters shall be of the integral type.

    (C)

    Improved roadways with a required width of less than 30 feet may be of the V section type, or of the crown type with curbs and gutters along each side, whichever is preferred by the developer.

(Ord. 1633-88; Ord. 1909-01 § 1 (part); Ord. No. 0128-2009, § 1, 2-9-2009)