§ 3343.15. Sidewalks.

Within each manufactured home park sidewalks shall be installed in accordance with the following:

(A)

All sidewalks shall be made of Portland cement concrete and shall have a thickness of no less than four inches; and

(B)

Common sidewalks, with a minimum width of four feet, intended to provide pedestrian circulation from one manufactured home to another or to various locations throughout the manufactured home park shall serve all manufactured homes and common use areas that front upon or have access from a roadway improved with curbs and gutters. Such sidewalks shall be located in either of the following locations depending upon the design of the park and the preference of the developer:

(1)

Within the boundaries of the roadway. Whenever this location is selected there shall be no less than four feet between the nearest edge of the sidewalk and the nearest edge of the curb. Such sidewalks are required to be installed on only one side of a roadway with an improved width of 20 feet and on both sides of a roadway with an improved width of greater than 20 feet.

(2)

Approximately midway between two tiers of manufactured home sites to provide an interior type of common walkway sidewalk circulation system.

(C)

A private sidewalk with a minimum width of two feet shall be provided for access from each manufactured home to a roadway or to a common walkway system.

(D)

No portion of any parking space shall overlap any portion of a sidewalk. Head-in parking shall be restrained from overlap by wheel stop devices provided in accordance with C.C. 3312.

(Ord. 1633-88; Ord. No. 1792-2011, § 1(Attach. 1), 12-12-2011)